Hornady Unprimed 300 PRC Brass Cases 

Product Description

Hornady Unprimed 300 PRC Brass Cases

Details

Firstly, Hornady produces brass with the same precision, attention to detail and focus on perfection. They measure their brass for consistent wall concentricity. Aswell, tests are given to pressure calibration to ensure uniform case expansion and hand-inspects each piece.

This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.

Brass Preparation:

With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.

Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.

On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

Instructions

• With all new rifle brass, you should first straighten out the case and case mouth
• Chamfer and debur the case mouth inside and out.
• To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  T
• o prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.